C.M.O Pompe PS | PST

C.M.O Pompe PS | PST

Features

The CMO pumps with worm feed screw belong to the rotating positive-displacement pump category. With simple construction, the pumps are intended above all for pumping dense and/or viscous fluids.

Construction and technical characteristics

The capacity varies depending on the rotor step. The PS series covers a capacity range from 50 to 4000 l/min. The pressure varies with the length of the stator from 0 to 30 bar. The parts in contact with the liquid are constructed in various materials, depending on the fluid to be pumped. The rotating parts are normally in casehardening or chromium-plated steel or in stainless steel 304 or 316. The stators are constructed in natural or synthetic rubber in different mixes (Viton, Silicon, Perbunan, etc.). Specific materials can be used on request.

Field of use

The applications for this type of pump are virtually infinite, due its special construction, the materials used, the technical measures adopted and the singular working mechanism guarantee maximum performance whether pumping brackish water, stall waste, unicellular cement, marble sludge, lime putty, synthetic resins, foundry sludge, etc. When pumping fluids with density and/or abrasion characteristics different to those of water, it is recommended never to reach the pressure limit and capacity values expressed in the table. For correct function of the pump, it is recommended to check that air is not being suctioned and that the supply of fluid to be pumped is constant to avoid the pump turning dry. The values featured in the table refer to tests performed with fluids with characteristics similar to those of water.

Additional Models

ModelSKU
PS 40 50/7PS 40 50/7
PS 120 870/26PS 120 870/26
PS 127 1300/7PS 127 1300/7
PS 200 1230/14PS 200 1230/14
PS 200 1230/26PS 200 1230/26
PS 207 2100/7PS 207 2100/7
PS 300 1400/14PS 300 1400/14
PS 307 4000/7PS 307 4000/7
PS 350 2000/14PS 350 2000/14
PS 400 2800/10PS 400 2800/10
PS 500 3500/10PS 500 3500/10
PS 33 160/7PS 33 160/7
PS 43 300/10PS 43 300/10
PS 53 410/10PS 53 410/10
PS 63 750/10PS 63 750/10
PS 83 800/14PS 83 800/14
PS 123 830/12PS 123 830/12
PS 120 870/12PS 120 870/12
PS 87 960/7PS 87 960/7
PS 40 140/7PS 40 140/7
PS 40 140/20PS 40 140/20
PS 45 120/7PS 45 120/7
PS 47 190/7PS 47 190/7
PS 50 120/10PS 50 120/10
PS 50 120/30PS 50 120/30
PS 55 200/10PS 55 200/10
PS 55 200/26PS 55 200/26
PS 57 450/7PS 57 450/7
PS 60 370/10PS 60 370/10
PS 60 370/14PS 60 370/14
PS 60 370/20PS 60 370/20
PS 60 370/26PS 60 370/26
PS 67 680/7PS 67 680/7
PS 80 520/14PS 80 520/14
PS 80 520/30PS 80 520/30
PS 303 1600/14PS 303 1600/14

Please Call 01296 488 294 or email sales@polypump.co.uk for availability and advice.

@ PolyPump Ltd 2024.
Registered VAT number is 826 0720 46    T&C Privacy Policy