C.M.O Pompe PT Inox

C.M.O Pompe PT Inox

Features

The CMO pumps with worm feed screw belong to the rotating positive-displacement pump category. With simple construction, the pumps are intended above all for pumping dense and/or viscous fluids.

Construction and technical characteristics

The capacity varies depending on the rotor step. The PS stainless steel series covers a capacity range from 50 to 4000 l/min, the PT stainless steel series from 50 to 1000 l/min with maximum rotation speed of 140 rpm or 200 rpm. The pressure varies with the length of the stator from 0 to 30 bar. The parts in contact with the liquid are constructed in various materials, depending on the fluid to be pumped. The rotating parts are normally in casehardening or chromium-plated steel or in stainless steel 304 or 316. The stators are constructed in natural or synthetic rubber in various mixes (Viton, Silicon, Perbunan, etc.). Specific materials can be used on request.

Field of use

The applications for this type of pump are virtually infinite due to its special construction, the materials used, the technical measures adopted and the singular working mechanism that guarantee maximum performance whether pumping must, bunches of grapes, fruit juices, meat extracts, jam, marmalade, acids, glues, oils, liquid soaps, detergents, etc. When pumping fluids with density and/or abrasion characteristics different from those of water, it is recommended never to reach the pressure limit and capacity values expressed in the table. For correct function of the pump, it is recommended to check that air is not being suctioned and that the supply of fluid to be pumped is constant to avoid the pump turning dry. The values featured in the table refer to tests performed with fluids with characteristics similar to those of water.


Additional Models

ModelSKU
PT 40 140/7PT 40 140/7
PT 83 800/14PT 83 800/14
PT 63 750/10PT 63 750/10
PT 53 410/10PT 53 410/10
PT 43 300/10PT 43 300/10
PT 33 160/7PT 33 160/7
PT 350 2000/7PT 350 2000/7
PT 300 1400/7PT 300 1400/7
PT 200 1230/7PT 200 1230/7
PT 120 870/7PT 120 870/7
PT80 520/7PT80 520/7
PT 60 370/7PT 60 370/7
PT 55 200/7PT 55 200/7
PT 123 830/12PT 123 830/12

Please Call 01296 488 294 or email sales@polypump.co.uk for availability and advice.

@ PolyPump Ltd 2024.
Registered VAT number is 826 0720 46    T&C Privacy Policy