ProMinent DULCOTEST CLE 3-mA
Total chlorineTotal of free and combined chlorine. Recommended sensor: Type CTE, reference method DPD4. more in the glossary refers to the total amount of free chlorine (HOCl, OCl-) and combined chlorineMono-, di-, trichloroamine. The measuring result of type CLE (free chlorine) is subtracted from the ... more in the glossary (chloramines).
Sensors for total chlorine are used in chloramination, chlorine elimination and wastewater monitoring. The total chlorineTotal of free and combined chlorine. Recommended sensor: Type CTE, reference method DPD4. more in the glossary measurement is also used in conjunction with the measurement of free chlorine to measure the amount of combined chlorine in swimming pool water.
ProMinent product line of DULCOTEST sensors for total chlorine includes the versatile CTE1 range with different measuring ranges and signal outputs.
- Versatile use with a wide range of water qualities (pH, salinity, temperature, chemical and contamination load); in combination with many disinfection processes (chlorine gas, sodium hypochlorite, calcium hypochlorite, chloramines); can also be used at high pH values up to 9.5
- Precise, real-time amperometric measurement for efficient process control (short response time)
- Amperometric measuring eliminates interference caused by turbidity or colouration
- Integrated temperature compensation eliminates interference caused by influence of temperature
- Diaphragm-covered electrodes for reduced dependence on flow, substances in water and film-forming media
- Diaphragm-covered measuring electrodes embedded in an electrolyte ensure long service life. This maintains optimum measuring conditions regardless of process conditions.
